|
Peerless

Trout Reel
|
Peerless fly reels are made by Bob Corsetti in Nashua, New Hampshire.
The trout reels are styled after the Bogdans and others of that
ilk. They are beautifully understated with black side plates and
satin silver frame and crossbars. Unlike several of the classic reels on the market, the Peerless models are completely anodized. The #1 is also usually available in
all black. All round trout models feature an S-handle and all except
the #1 and #7 are available only with the external pawl adjustment.
The "7" series (77 and 7M) feature raised pillars, a solid spool
and crankplate, and a diamond (Conroy) styled handle (half-handle
on the #77.) The Salmon reels are designed after the vom Hofe reels
and look somewhat similar to other vom Hofe reincarnations. There
is one exception, and that is that the Peerless Salmon model has
a knurled oversized knob on the backplate for drag adjustment as
opposed to the 7-10 position detent lever used on the original vom
Hofe and most of its modern copies. There are advantages to both
systems, so take your pick. In addition to the self-cleaning, non-fading,
non-sticking drag system, the Salmon models also include the Peerless
pawl/click system in order to prevent free-spooling. These are really
beautiful, non-glare, traditionally-styled reels. The integrity
of this system does not allow for quick spool changes. The #4A is a very large version of the trout reels designed specifically for speyfishing. It was the first classic S-handled reels to feature just a gear and pawl with no actual drag. It has enormous capacity, even for a spey reel. It's also not nearly as heavy as many spey reels. The recent movement to shorter Scandinavian and Skagit rods means there's a definite need for lighter weight reels that still have quite a bit of capacity. The #4A fills this roll very well.
|
FEATURES
Oil impregnated bronze bearings
Stainless
steel centerless ground bearing shaft
Non-glare anodized finish
Extremely
smooth pawl/click drag
"A"
models are externally adjustable
Fully
machined one piece cage design |

7 Series |
|
|
Model
|
Dia. |
Wd.
|
Wt. |
Capacity
|
Price
|
Spool |
|
#77 |
2.500 |
1.160
|
4.2
|
DT3F
& 20yds of 20# |
$649.00
|
NA |
#7M |
2.750 |
1.160 |
4.7 |
DT4F
& 80yds of 20# |
$649.00 |
NA |
|
#1A
|
2.750 |
1.160 |
4.6 |
WF3F
& 30yds of 20# |
$649.00
|
NA |
|
#1.5A |
3.000 |
1.160 |
4.9
|
DT5F
& 30yds of 20# |
$649.00 |
NA
|
|
#2A |
3.250 |
1.160
|
5.5 |
DT5F
& 60yds of 20# |
$649.00 |
NA |
|
#3A |
3.250 |
1.625 |
5.7 |
WF7F
&150yds of 20# |
$649.00 |
NA |
|
#4A |
4.500 |
1.625 |
8.3 |
DT11F&150yds
of 20# |
$729.00 |
NA |
|
#5A |
3.250 |
1.750 |
7.8 |
WF7F
&150yds of 20# |
$929.00 |
NA
|
|
#6A |
3.500 |
2.000 |
10.0 |
WF9F
&225yds of 30# |
$929.00 |
NA |
Bob will also sell you additional Peerless reelcases for $25.00 each. He also has a special two knob handle available for the 2A and 3A which cost $50.00 each or they can be ordered with a new reel for $35.00.

4A Spey
|
Salmon
|
|